Smoke & Water monitoring are configured on the "Smoke" and/or "Water" tab of the Environment container.
Smoke Sensor Configuration |
|
Water Sensor Configuration |
Connection Settings
Select the serial port to which the serial adapter is attached to, and indicate at which position (1-4) the sensor is attached to. The position is indicated on the actual adapter and is always 1 if the adapter only supports one sensor.
General Settings
Select how often you want alerts to be generated when continuous smoke or water is being detected.
Location
If you are using multiple smoke or water sensors in your organization then you can specify the location here. The location is included in the alerts that are logged to the event log, it is not shown in the web reports.
