|
Die folgenden Ereignisse werden mit der Ereigniskategorie Environment Sensors protokolliert. |
Event ID |
Severity |
Event Description |
Example |
10903 |
Error |
No environment monitor found |
EventSentry was unable to find a temperature and/or humidity sensor on serial port COM1. Please make sure the device is connected properly. |
10904 |
Error |
Database interval too small |
The database write interval for environment monitoring is set too small. The interval was automatically adjusted to 900 seconds. |
10908 |
Error |
The temperature has fallen outside the configured range. |
The current temperature has fallen outside the configured range (60F to 76F). The current temperature is 83.58 degrees (F). |
10909 |
Error |
The humidity has fallen outside the configured range. |
The current humidity has fallen outside the configured range (10% to 60%). The current humidity is 9%. |
10910 |
Information |
The temperature is back inside the configured range. |
The current temperature is back in the configured range (60F to 76F). The current temperature is 74.57 degrees (F). |
10911 |
Information |
The humidity is back inside the configured range. |
The current humidity is back in the configured range (10% to 60%). The current humidity is 12%. |
10912 |
Error |
Motion detected |
Motion sensor (Server Room ABC) detected motion. |
10913 |
Error |
Smoke detected |
Smoke sensor (Server Room ABC) detected smoke. |
10914 |
Error |
Water detected |
Water sensor (Server Room ABC) detected water. |
10915 |
Error |
Smoke sensor failed self test |
EventSentry failed to detect the required self-test of the smoke sensor which is run every 24 hours. Please press the TEST button on the smoke sensor for at least 30 seconds to make sure that the sensor works correctly and an alert is generated by EventSentry. |
10916 |
Error |
Sensor error |
The attached Water sensor reported an error, or no sensor is attached. This feature has been turned off. |
